Whirlpool WOD97ES0ES Installation Guide - Page 9
Go to the Make Electrical Connection
View all Whirlpool WOD97ES0ES manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 9 highlights
Cutout Height is Between 2615⁄16" and 2711⁄16" (68.4 cm and 70.3 cm) 1. Using 2 or more people, place the oven on its back on a covered surface. Cutout Height is Between 2811⁄16" and 297⁄16" (72.8 cm and 74.8 cm) 1. Using 2 or more people, place the oven on its back on a covered surface. 2. Remove the foot from the right front spacer by removing the #8-18 x ³⁄8" screw. NOTE: Do not remove the spacer. 2. Remove the foot from the right front spacer by removing the #8-18 x ³⁄8" screw. NOTE: Do not remove the spacer. $ $ % % & A. Spacer B. Foot C. #8-18 x ³⁄8" screw & A. Spacer B. Foot C. #8-18 x ³⁄8" screw 3. In the same manner, remove the feet on the right rear, left front, and left rear of the oven. 4. Using 2 or more people, place the oven in its upright position. 3. Rotate the foot 90° so the short side of the foot is positioned toward the top of the oven. 5. Go to the "Make Electrical Connection" section. 4. Reinstall the foot to the spacer using the #8-18 x ³⁄8" screw previously removed. 5. In the same manner, remove, rotate, and reinstall the feet on the right rear, left front, and left rear of the oven. 9