Whirlpool WRF767SDEM Use & Care Guide - Page 26
Refrigerator Features
View all Whirlpool WRF767SDEM manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 26 highlights
REFRIGERATOR FEATURES Important information to know about glass shelves and covers: Do not clean glass shelves or covers with warm water when they are cold. Shelves and covers may break if exposed to sudden temperature changes or impact, such as bumping. Tempered glass is designed to shatter into many small, pebble-size pieces. This is normal. Glass shelves and covers are heavy. Use both hands when removing them to avoid dropping. Refrigerator Shelves The shelves in your refrigerator are adjustable to meet your individual storage needs. Storing similar food items together in your refrigerator and adjusting the shelves to fit different heights of items will make finding the exact item you want easier. It will also reduce the amount of time the refrigerator door is open, and save energy. Shelves and Shelf Frames To remove and replace a shelf/shelf frame: 1. Remove the shelf/frame by tilting it up at the front and lifting it out of the shelf supports. 2. Replace the shelf/frame by guiding the rear shelf hooks into the shelf supports. Tilt the front of the shelf up until rear shelf hooks drop into the shelf supports. 3. Lower the front of the shelf and make sure that the shelf is in position. MicroEdge® Glo shelves (on some models): ■ The hooks on the rear of the shelf must be fully engaged in the shelf supports to maintain proper electrical flow. ■ No more than two shelves with under-shelf lighting may be used in the refrigerator at one time. Tuck Away Shelf (on some models) To retract and extend the front section of the shelf: 1. To retract the front-section of the shelf, slightly lift up on the front edge and push the adjustable portion of the shelf back toward the rear of the refrigerator. 2. Extend the front of the shelf by pulling the retracted portion of the shelf outward until it is fully extended. Crisper Drawers/Pantry Drawer/Crisper Cover To remove and replace the drawers: 1. Slide the drawers straight out to the stop. Lift the drawers from the rails and pull them out the rest of the way. 2. Replace the drawers by placing them on the rails and pushing them back into position past the drawer stop. 26