Whirlpool WRTX5028PB Owners Manual - Page 11
Style 2 - Contour Door Models, Cabinet, A. Door Handle Sealing Screws
View all Whirlpool WRTX5028PB manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 11 highlights
3. Remove door hinge hole plug from refrigerator door. Move to opposite side hinge hole as shown below. Style 2 - Contour Door Models Graphics follow these instructions. A. Door Hinge Hole Plug 4. Remove door handle sealing screws. Move to opposite side of refrigerator door as shown. A. Door Handle Sealing Screws 5. Remove door handle hole plug and discard. Replace on opposite side with the door handle hole plug provided in the Reversibility Kit located in the crisper. Door Hinge Cabinet Setscrew Hole Plug Hinge Hole Plug Door Stop Screw Shoulder Screw Washer Dome Cap Dome Cap Shoulder Washer Screw Flat-Head Handle Screw Door Handle Hole Plug Cabinet 1. Remove the three dome caps and the screws from handle side and move them to opposite side. 2. Using the three 5/16" hex-head hinge screws, insert two screws halfway into the holes, leaving space to insert the Center Hinge. 3. Slide the center hinge, from the right, onto the screws, insert the third screw, and tighten all screws completely. NOTE: Make sure the washers are in place on both the top and bottom pins of the center hinge. 6. Remove door stop. Move to opposite side of refrigerator door as shown below. A. Door Stop Screw B. Door Stop 7. Refer to image in Step 2. Position refrigerator handle on opposite side of the refrigerator door. First, drive top two screws in handle first. Align lower portion of handle and drive bottom screw into handle. 8. Tighten all screws. Set aside refrigerator door until bottom hinge is installed on refrigerator. 9. Replace screw cover. A. 5/16" Hex-head hinge screws B. Washers 4. Remove cabinet hinge hole plugs from the cabinet top and move them to opposite side hinge holes as shown below. A. Cabinet Hinge Hole Plugs 11