Whirlpool WVW53UC6FS Installation Guide - Page 9
Warning
View all Whirlpool WVW53UC6FS manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 9 highlights
Make Electrical Connection WARNING WARNING Electrical Shock Hazard Disconnect power before servicing. Replace all parts and panels before operating. Failure to do so can result in death or electrical shock. 1. Disconnect power. 2. Remove terminal box cover. 3. Remove the knockout in the terminal box and install a UL listed or CSA approved 1/2" strain relief. 4. Run home power supply wiring through 1/2" strain relief into terminal box. E Electrical Shock Hazard Electrically ground blower. Connect ground wire to green and yellow ground wire in terminal box. Failure to do so can result in death or electrical shock. 7. Connect green (or bare) ground wire from home power supply to the 2 yellow-green ground wires (D) in terminal box using UL listed wire connectors. 8. Tighten strain relief screw. 9. Install terminal box cover. 10. Reconnect power. D C B A A UL listed wire connectors B. White wires C. Black wires D. Green (or bare) wire connected to yellow-green wires E. Home power supply 5. Use UL listed wire connectors and connect white wires (B) together. 6. Use UL listed wire connectors and connect black wires (C) together. 9