Xerox 1235/DX Troubleshooting Guide - Page 21
Printer Features, Media Handling, Input Sources, Output Destinations
UPC - 042215474542
View all Xerox 1235/DX manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 21 highlights
Getting to Know Your Printer Printer Features Your printer has many special features that enable you to achieve the results you need for your specific print job. Features vary according to the options installed on your printer. This section will help you become familiar with your printer's features and capabilities. Media Handling Your printer has several media input sources and output destinations as described below. Input Sources I The standard Multi-sheet Bypass Feeder (MBF) functions as either a single-sheet manual-feed tray or a tray for up to 100 sheets of standard 20-lb. (75 g/m2) bond paper, up to 80 standard or premium transparency sheets and a smaller number of sheets of special media. I Tray 1 is the standard input tray that holds up to 530 sheets of 20-lb. (75 g/m2) bond paper or 175 standard or premium transparencies. I Tray 2 is the optional input tray installed immediately below Tray 1. It holds up to 530 sheets of 20-lb. (75 g/m2) bond paper. Transparencies are not supported from this tray. I Tray 3 is the optional input tray installed immediately below Tray 2. Like Tray 2, it holds up to 530 sheets of 20-lb. (75 g/m2) bond paper. Transparencies are not supported from this tray. Trays 1, 2 and 3 all have paper-size sensing, low-paper sensing and tray-empty sensing. Paper levels are indicated on a gauge visible at the front of the tray. When the level reaches approximately 40 sheets, the low paper warning displays on the front panel. The Multi-sheet Bypass Feeder (MBF) has tray-empty sensing, but not paper-size sensing. Refer to Loading Print Media on page 13 for information on supported media and instructions on loading the trays. Output Destinations I The standard face-down bin (see Front View on page 2) holds up to 500 sheets and receives prints face-down. It has bin full detection. I The face-up bin (see Rear View on page 3) holds up to 100 sheets and receives prints face-up (at the rear of the printer) . Note When the rear door is open, all prints are diverted to the face-up bin. Note Face-up bin does not have bin full detection. Advanced Features and Troubleshooting Manual 5