Xerox 3400B User Guide - Page 9

User safety summary Operational Safety Your printer and its supplies were designed and tested to meet strict safety requirements. These include safety agency examination, approval, and compliance with established environmental standards. To ensure the continued safe operation of your printer, follow these safety guidelines at all times: I Follow warnings and instructions marked on or supplied with the equipment. I Use materials and supplies specifically designed for your printer. The use of unsuitable materials may result in poor performance and possibly a hazardous situation. I Do not attempt any maintenance function that is not specifically described in the printer's documentation. I Never remove covers or guards that are fastened with screws or require a tool for removal, unless directed to do so in a Xerox approved maintenance kit. I Do not override or disable electrical or mechanical interlocks. Machines are designed to restrict operator access to unsafe areas. Covers, guards and interlock switches are provided to ensure that the machine will not operate with covers opened. I Do not operate the printer if you notice unusual noises or odors. Disconnect the power cord from the power source receptacle, and contact the Xerox Customer Support Center immediately. I This printer should be operated from the type of power source indicated on the marking label. If you are not sure of the type of power available, consult your local power company. I Use only the power cord supplied with your Phaser 3400 printer. I This product is equipped with a 3-wire grounding type plug (e.g., a plug having a third grounding pin). This plug will fit only into a grounding-type power outlet. This is a safety feature. To avoid risk of electrical shock, contact your electrician to replace the receptacle if you are unable to insert the plug into the outlet. Never use a grounding adapter plug to connect the printer to a power source receptacle that lacks a ground connection terminal. I Plug the power cable directly into a properly grounded electrical outlet. Do not use an extension cord. If you are not sure whether or not an outlet is properly grounded, consult an electrician. I Your machine is equipped with an energy saving device to conserve power when the machine is not in use. The machine may be left on continuously. I Do not place the printer where people might step or trip on the power cable. I Do not place objects on the power cable. I Do not place the printer on an unstable cart, stand or table. The printer may fall, causing personal injury or serious damage to the printer. I Do not locate the printer near a radiator or any other heat source. viii Phaser 3400 Personal Laser Printer