Xerox 3450D Service Manual - Page 79
Jam At Duplex (Duplex Jam 1
![]() |
UPC - 095205120028
View all Xerox 3450D manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 79 highlights
Jam At Duplex (Duplex Jam 1) Paper jams in the Exit Transport Assembly or before, or in the Duplex Feed Rollers. Troubleshooting References s3450-167 Applicable Parts Exit Sensor Actuator Exit Roller Assembly Transport Roller Assembly Main Board Procedure Wiring and Plug/Jack Map References Step 1 2 3 4 5 Action and Questions Yes No Is the Exit Sensor Actuator damaged or binding? Repair or replace the actuator and/or sensor. Go to Step 2. Inspect the Exit Roller Assembly. Is it damaged or binding? Replace the Exit Go to Step 3. Roller Assembly. Inspect the Duplexer. Is any paper wrapped around the Duplex Rollers? Remove obstruction and clean rollers. Go to Step 4. Is the Transport Roller Assembly operational (rotates freely without binding)? Go to Step 5. Replace Transport Roller Assembly. Use the embedded diagnostics to check the Fuser Exit Sensor. Is the sensor operational? Replace Main Board. Replace Exit Sensor. 4-12 Phaser 3450 Laser Printer Service Manual
![](/manual_guide/products/xerox-3450b-service-manual-8605f8d/79.png)