Xerox 5550N User Guide (English) - Page 133
Selecting Output Options, Selecting Job Offset
UPC - 095205737257
View all Xerox 5550N manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 133 highlights
Printer Settings Selecting Output Options The Phaser 5550 printer has one standard output tray and two optional ones: ■ Standard Output Tray: Sends prints to the Standard Output Tray on top of the printer. ■ Stacker Upper Tray: Sends prints to the Stacker Upper Tray on the right side of the printer. This tray is available with the optional finisher or stacker. ■ Stacker Lower Tray: Sends prints to the Stacker Lower Tray on the right side of the printer. This tray is available with the optional finisher or stacker. To select the output tray: 1. On the control panel, select Printer Setup, select Paper Handling Setup, and then select Paper Destination. 2. Select either Standard Output Tray, Stacker Upper Tray, or Stacker Lower Tray, and then press the OK button. Note: The printer driver overrides the control panel settings for output tray selection. Selecting Job Offset The Stacker Lower Tray and Standard Output Tray can place sheets in alternate positions to separate one print job from another. This is called job offsetting. There are several job offsetting options from which to choose: ■ Off: No job offsetting occurs and the output position is not changed for the output tray selected. ■ On: The output position changes after the final sheet of the print job is printed. The next print job is then offset to keep it separate from the previous print job. Note: When the stapling option is used for print jobs, job offsetting is activated. To select the job offset option: 1. On the control panel, select Printer Setup, and then press the OK button. 2. Select Paper Handling Setup, and then press the OK button. 3. Select Job Offset, and then press the OK button. 4. Press the OK button to switch between On and Off. Phaser® 5550 Printer 5-3