Xerox 5550N User Guide (English) - Page 209
Unfused or Partially Fused Image
UPC - 095205737257
View all Xerox 5550N manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 209 highlights
Print-Quality Problems Unfused or Partially Fused Image The printed image is not fully fused to the paper and easily rubs off. Possible Causes The paper may be damp. Heavy or unusual paper may be in the tray. The printer may be located in an environment with extreme temperature or humidity. The fuser may be defective. Solutions Replace the paper. Replace the paper with an approved paper type then do the following: ■ On the control panel, select Paper Handling Setup, and then select Fuser Configuration. ■ Adjust the fuser setting for the paper type selected. Verify that the printer is located in an environment with the temperature between 5° and 32° C (41° and 89° F) and the relative humidity between 15% and 85%. Move the printer to a suitable area, away from air conditioning vents, open loading docks, etc. Replace the fuser (in the maintenance kit). Phaser® 5550 Printer 6-65