Xerox 7400N User Guide - Page 24
Dynamic Methods of Setting the Printer’s IP Address, Enabling DHCP on the Printer
UPC - 095205006414
View all Xerox 7400N manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 24 highlights
Configuring the Network Address Dynamic Methods of Setting the Printer's IP Address Set the printer's IP address using any of the following methods. DHCP is enabled by default on all Phaser printers. ■ DHCP ■ CentreWare IS ■ AutoIP Information Required for Manual IP Addressing Information Internet Protocol (IP) address of the printer Network Mask Default Router/Gateway address Comments Format is xxx.xxx.xxx.xxx, where xxx represents a decimal number from 0-255. If you are unsure, leave this blank; the printer chooses an appropriate mask. Router address is required to communicate with the host device from anywhere other than the local network segment. Enabling DHCP on the Printer Verify that the printer DHCP protocol is enabled by setting the control panel or by using CentreWare IS. DHCP is enabled by default on all Phaser printers. Note: To determine the printer's IP address, select Printer Identification on the control panel. See also: Control Panel Features on page 1-8 Changing or Modifying the IP Address Using CentreWare IS CentreWare IS provides a simple interface that enables you to manage, configure, and monitor networked printers from your desktop using an embedded web server. For complete information about CentreWare IS, click the Help button in CentreWare IS to go to the CentreWare IS Online Help. After setting the printer's IP address, you can modify TCP/IP settings using CentreWare IS. 1. Launch your web browser. 2. Enter the printer's IP address in the browser's Address field (http://xxx.xxx.xxx.xxx). 3. Click Properties. 4. Select the Protocols folder on the left sidebar. 5. Select TCP/IP. 6. Enter or modify the settings, and then click Save Changes at the bottom of the page. Phaser® 7400 Color Printer 2-6