Xerox 7400N User Guide - Page 71
Printing Glossy Paper, Guidelines
UPC - 095205006414
View all Xerox 7400N manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 71 highlights
Printing on Specialty Media 4. When the control panel prompts you to confirm the type and size of paper in the tray, select Change setup, and then press the OK button. a. Select Labels as the paper type, and then press the OK button. Note: If you are printing on unusually heavy labels, select Heavy Labels. For more information, see Supported Paper and Media on page 3-3. b. Select either Letter SEF or A4 SEF, and then press the OK button. 5. In the printer driver, select Tray 1 as the paper source and/or select Labels as the paper type. Printing Glossy Paper Glossy paper within the weight range 120-160 g/m2 can be printed from Tray 1 (MPT). It should be printed on one side only. To order paper, transparencies, or other specialty media, contact your local reseller or go to www.xerox.com/office/supplies. Guidelines ■ Do not open sealed packages of glossy paper until you are ready to load them into the printer. ■ Leave glossy paper in the original wrapper, and leave the packages in the shipping carton until ready to use. ■ Remove all other paper from the tray before loading glossy paper. ■ Load only the amount of glossy paper you are planning to use. Do not leave glossy paper in the tray when you are finished printing. Reinsert unused glossy paper in the original wrapper and seal. ■ Rotate stock frequently. Long periods of storage in extreme conditions can cause glossy paper to curl and jam the printer. Phaser® 7400 Color Printer 3-42