Xerox 750DP Fiery SI Color Server User Guide - Page 89
Calibrating with a densitometer, workstation with Fiery XJ Print Calibrator.
UPC - 042215455107
View all Xerox 750DP manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 89 highlights
66-11 Understanding calibration 10. When prompted to Print Comparison Page, select Yes. Verify that the colors on the page are correct. 11. When Prompted to Overwrite Calibration, select Yes. 12. Select Yes to confirm. 13. When calibration is complete, choose Exit Calibration. This automatically restarts your Fiery SI. Calibrating with a densitometer To calibrate with a densitometer, the Fiery SI must have a serial port to connect the densitometer to. Contact your authorized service/support center for information about Fiery SI hardware. TO CALIBRATE WITH A DENSITOMETER: 1. Connect the DTP32 densitometer to your Fiery SI For instructions, see "Setting up the densitometer" on page 6-4. 2. Restart the Fiery SI and press the Menu key when prompted to enter Setup. 3. Press Run Setup. 4. Scroll down to choose Calibration. 5. Choose Calibrate. The Calibration Method screen appears. 6. Select Densitometer for the Calibration Method. 7. When prompted to Select Target, use the up/down arrow keys to scroll through the list of target names, then choose OK. You can choose from the list of all targets on the Fiery SI. This includes several targets included with the Fiery SI as well as any custom targets you have created from your workstation with Fiery XJ Print Calibrator.