Xerox 7750B PhaserMatch and PhaserCal 4.0 User Guide - Page 14
Creating Custom TekColor Corrections, Creating Device Link Profiles - parts
UPC - 095205024715
View all Xerox 7750B manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 14 highlights
Creating Custom TekColor Corrections The Phaser printer should have been calibrated using one of the methods mentioned previously in this document before creating new TekColor corrections. When the printer has been color calibrated you can create and use custom TekColor corrections. To create a TekColor correction using a Phaser printer ICC profile and a target device ICC profile: 1. Launch the PhaserMatch application. 2. Click the Create Profile button in the main PhaserMatch screen. 3. Create a device link profile, see Creating Device Link Profiles on page 3-1. 4. Create a new custom TekColor correction; see Creating Custom TekColor Corrections on page 3-2. Creating Device Link Profiles PhaserMatch software enables you to perform color matching between two devices: your Phaser color printer and another output device such as a printing press or another printer. It does this through the creation of a Device Link Profile (DLP). A device link profile is an ICC profile that combines the color information about the printer and the target device into one file. Creating device link profiles enables you to alter the colors printed by your Phaser printer so they more closely match the colors produced by the output device of your choice. PhaserMatch works with the following types of profiles. ■ Phaser printer ICC profiles that get installed as part of the standard installation. ■ Phaser printer ICC profiles that get installed as part of the optional software install. These are ICC profiles that simulate the TekColor corrections that are already in the printer such as Commercial Press and SWOP Press. ■ Target device ICC profiles that get installed with the standard installation. ■ Target device ICC profiles that get installed with the optional software installation. ■ ICC Profiles created in a third-party profile creation software. PhaserMatch and PhaserCal 4.0 User Guide 3-1