Xerox 8500DN User Guide - Page 89
Random Light Stripes, Problem, Solution
![]() |
UPC - 095205022063
View all Xerox 8500DN manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 89 highlights
Solving Print-Quality Problems 3. If the problem continues: a. Open the door on the right side of the printer and remove the maintenance kit. b. Wipe the plastic wiper blade with a lint-free cloth. c. Replace the maintenance kit and close the door. Note: Smudges or smears may appear if you print on side two of pre-printed paper, but do not select 2nd Side as the paper type. Select the 2nd Side option on the control panel and in the printer driver. See Manual 2-Sided Printing on page 3-26 for more information about 2nd Side printing. Random Light Stripes Problem Light stripes appear randomly on the test page when one or more color bars is missing. Light Stripes Test Solution To prevent random light stripes from appearing on the page: 1. On the control panel, select Troubleshooting, and then press the OK button. 2. Select Print Quality Problems, and then press the OK button. 3. Select Eliminate Light Stripes, and then press the OK button. a. Select Basic, and then press the OK button. Repeat this procedure up to two times to eliminate light stripes. b. If the problem continues, select Advanced, and then press the OK button. Follow the instructions to select the missing jet's color and number. See the Light Stripes Test page to determine the color and jet number of the missing jet. 4. If light stripes continue to appear: a. Turn off the printer for at least four hours. b. Turn on the printer and, if necessary, repeat the Basic procedure once. Phaser® 8500/8550 Color Printer 4-6
![](/manual_guide/products/xerox-8500dn-user-guide-ac31d41/89.png)