Xerox 850DP Xerox Wide Format 8850 Operator Manual - Page 34
Specifying the finisher configuration type, Performing printer diagnostics, Printing a test plot
UPC - 042215454858
View all Xerox 850DP manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 34 highlights
OFF-LINE SETUP MENU Specifying the finisher configuration type Performing printer diagnostics To specify the finisher configuration type: 1. Access the PRINTER MENU. See "Accessing the Printer Menu" in this chapter. 2. Press the Previous or Next key until FINISHER SETTINGS is displayed. 3. Press the Enter key to select FINISHER SETTINGS. 4. Press the Enter key to select FINISHER CONFIG TYPE. The current value for the FINISHER CONFIG TYPE option is displayed. 5. Press the Previous or Next key to switch between NONE and 003. 6. Press the Enter key to save your selection. 7. Press the On-line/Off-line key to return to on-line mode. • The on-line/off-line indicator will light. • The display will indicate "XES SYNERGIX 8850 IDLE." The DIAGNOSTICS option has two operator-accessible suboptions - TEST PLOT and RECENT FAULT LOG. NOTE: A third DIAGNOSTICS option, PRINTER DIAGNOSTICS, is restricted to the service representative. If you select it, you will be asked to enter a password. Press the Exit key to exit the option. Printing a test plot To print a test plot: 1. Access the PRINTER MENU. See "Accessing the Printer Menu" in this chapter. 2. Press the Previous or Next key until DIAGNOSTICS is displayed. 3. Press the Enter key to select DIAGNOSTICS. 4. Press the Enter key to select TEST PLOT. 5. Press the Previous or Next key to scroll through the media sources. 6. Press the Enter key to select the media source. The printer will initialize the media supply and print the test plot. 7. Press the On-line/Off-line key to return to on-line mode. • The on-line/off-line indicator will light. • The display will indicate "XES SYNERGIX 8850 IDLE." 24 XES SYNERGIX 8850 PRINTER OPERATOR MANUAL