Xerox XL-795D Service Manual - Page 4

B. SPECIFICATIONS 1. Maximum Resolution 2. Recommend Resolution 3. Synchronization Range Horizontal Vertical 4. Active Display Area 5. Dot Pitch 6. Support display colors 7. Contrast Ratio (Typical) 8.Luminance of White 9. Bandwidth 10. User Control 11. OSD Function 12. View Angle CR=5 Horizontal Vertical 13. Power Source 14. Power Consumption 15. Connection Type 16. Input Signal Video Sync. 17. Color Temperature 18. Dimension (WxHxD) Set 19. Monitor Weight 20. Base Operation Tilt 21. Power Saving ON STAND BY OFF Packing 22. Signal Connector Pin Assignment Pin No. 23. Audio signal 1280 x 1024 @ 75Hz 1280 x 1024 @ 60Hz 31 - 80 KHz 60- 75 Hz 376mm (H) x 301mm (V) 0.294(H) x 0.294(V) mm 16.7M color 600 250cd/m² 135MHz 4 Key Switch Brightness, Conrast, H-Pos, V-Pos, H. Size, Phase, Color Select, Auto, Reset, Language, OSD Adjust, Exit 85 , 85 Degrees 85 , 85 Degrees 100 - 240 Vac 60 / 50 Hz 60W (max.) 15 Pin D Type / DVI Analog R.G.B. , 0.7Vp-p / 75 Ohms TTL level,positive or negative polarity Cool / Natural / Warm 484mm x 500mm x 150mm 420mm x 428mm x 170mm 7.3Kg / 6.1Kg 0 / + 15 degree 60W 5W 5W 1. Red 9. VDD from PC for DDC 2. Green 10. Sync. Ground 3. Blue 11. Ground 4. Ground 12. SDA (For DDC) 5. Self Test 13. Horizontal Sync. 6. Red Ground 14. Vertical Sync. 7. Green Ground 15. SCL (For DDC) 8. Blue Ground 3.5F stereo phone jack 2.5+2.5W 8O Speaker