Yamaha 12 GF24/12 GF16/12 GF12/12 Owners Manual - Page 7
PRE switches, PAN control, ON switch, Group select switches, ST stereo switch
View all Yamaha 12 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 7 highlights
Channel controls 7 7 PRE switches These switches select whether the pre or post fader signal will be sent to AUX buses 3-6. This setting is switched in pairs: AUX 3/4 and 5/6. When the switch is pressed in, the pre-fader signal will be sent to the corresponding pair of AUX buses. When the switch is in the out (up) position, the post-fader signal will be sent. 8 PAN control This adjusts the left/right position at which the input channel signal will be sent to the ST (stereo) bus, GROUP bus 1/2, and GROUP bus 3/4. 9 ON switch This switches the input channel on/off. When this switch is turned off, the signal of the input channel will not be sent to the ST bus, GROUP buses, or AUX buses. However even if this switch is off, you can use the PFL switch (B) to monitor the signal from the C-R OUT jacks or the PHONES jack. 0 Group select switches These switches send the signal of the input channel to GROUP buses 1-4. When the 1-2 switch is on (pressed in) the signal will be sent to GROUP bus 1/2. When the 3-4 switch is on, the signal will be sent to GROUP bus 3/4. A ST (stereo) switch This switch sends the signal of the input channel to the ST bus. When this switch is on, the signal will be sent to the ST bus. B PFL (pre-fader listen) switch This switch sends the pre-fader signal to the PFL/ AFL bus, allowing you to monitor it through headphones or monitor speakers. When this switch is on, the pre-fader signal of the input channel can be heard from the C-R OUT jacks and the PHONES jack, even if the ON switch (9) is off. C Channel fader This fader adjusts the input level of the input channel. The position of the channel fader will affect the level of the signal that is output from the ST bus, GROUP buses 1-4, and AUX buses 1- 6 (except when the PRE switch is on for AUX buses 3-6). INPUT A 1-20 {1-12} {1-8} INPUT B PHANTOM PHANTOM +48V +48V PAD HA 26dB GAIN INSERT I/O 0dB HPF 80 3 Stage EQ LOW g f MID g HIGH g PEAK ON PFL ST 1-2 PAN 3-4 AUX 1 AUX 2 PRE AUX 3 AUX 4 PRE AUX 5 AUX 6 GROUP AUX PFL/AFL ST 1234 123456 LR LR Mono input channel signal flow -Owner's Manual