Yamaha 6160 Owner's Manual - Page 92

Customizing this unit (MANUAL SETUP) ■ Speaker distance C)SP DISTANCE Use this feature to manually adjust the distance of each speaker and the delay applied to the respective channel. Ideally, each speaker should be the same distance from the main listening position. However, this is not possible in most home situations. Thus, a certain amount of delay must be applied to the sound from each speaker so that all sounds will arrive at the listening position at the same time. [ p [ p C)SP DISTANCE 1/2 . UNIT;;;;;;;;feet FRONT L;;;10.0ft FRONT R;;;10.0ft CENTER;;;;;8.5ft SUR. L;;;;;8.0ft SUR. R;;;;;8.0ft [ ]/[ ]: Up/Down [p]/[[]: Select C)SP DISTANCE 2/2 . SBL;;;;;;;;8.0ft SBR ;;;;;;;;8.0ft SWFR;;;;;;;10.0ft PRNS L;;;;;10.0ft PRNS R;;;;;10.0ft [ ]/[ ]: Up/Down [p]/[[]: Adjust Unit for the speaker distance adjustment Initial setting: [U.S.A. and Canada models]: feet (ft) [Other models]: meters (m) UNIT Choice Functions meters (m) Adjusts speaker distances in meters. feet (ft) Adjusts speaker distances in feet. Speaker distances Control range: 0.30 to 24.00 m (1.0 to 80.0 ft) Control step: 0.10 m (0.5 ft) Initial setting: FRONT L/FRONT R/SWFR/PRNS L/ PRNS R: 3.00 m (10.0 ft) CENTER: 2.60 m (8.5 ft) SUR. L/SUR. R/SBL/SBR: 2.40 m (8.0 ft) SP DISTANCE Adjusted speaker FRONT L Front left speaker FRONT R Front right speaker CENTER Center speaker SUR. L Surround left speaker SUR. R Surround right speaker SBL Surround back left speaker SBR Surround back right speaker SWFR Subwoofer PRNS L Presence left speaker PRNS R Presence right speaker Notes • The available speaker channels differ depending on the setting of the speakers. • Instead of "SBL" and "SBR", "SUR.B" is displayed if "SUR.B L/R SP" is set to either "SMLx1" or "LRGx1" (see page 86). ■ Test tone D)TEST TONE Turns the test tone output on or off for the "SPEAKER SET", "SP LEVEL", and "SP DISTANCE" settings. D)TEST TONE >OFF ON [p]/[[]: Select [ENTER]: Return Choice Functions OFF This unit does not output the test tone for the "SPEAKER SET", "SP LEVEL", and "SP DISTANCE" settings. ON This unit outputs the test tone for the "SPEAKER SET", "SP LEVEL", and "SP DISTANCE" settings. y If you use a handheld sound pressure level meter, hold at arm's length and point upwards so that the meter is in the listening position. With the meter set to the 70 dB scale and to C SLOW, calibrate each speaker to 75 dB. Note This function is automatically turned off if you exit from "BASIC MENU". 88 En