Yamaha 930 Owner's Manual - Page 32

The Function Mode F5 CLP-950 Pedal Functions After selecting "F5.Y", press the [+/YES] button to engage the pedal functions sub-mode, then use the [TEMPO/FUNCTION t, s] buttons to select the desired pedal functions, as listed below. F5.1: Left Pedal Mode ...This function conveniently lets you set the left pedal for normal soft pedal operation, or for song start/stop operation. Use the [-/NO] and [+/YES] buttons to select the desired leftpedal mode. Press the [-/NO] and [+/YES] buttons simultaneously to recall the default setting "1". 1: Soft 2: Start/Stop The left pedal functions as the soft pedal. The left pedal functions in the same manner as the SONG [START/STOP] button. F5.2: Sustain Sample Depth ... The CLP-950 GRAND PIANO 1 voice features special "Sustain Samples" which recreate the unique resonance of an acoustic grand piano's soundboard and strings when the damper pedal is pressed. This function lets you adjust the depth of this effect. Use the [-/NO] and [+/YES] buttons to set the effect depth as required. The effect depth range is from 0 through 20. A setting of "0" produces no effect, while a setting of "20" produces maximum effect depth. Press the [-/ NO] and [+/YES] buttons simultaneously to recall the default setting "12". F5 CLP-930 Metronome Volume F6 CLP-950 Metronome Volume I SHORTCUT: You can jump directly to the metronome functions by pressing the [FUNCTION] button while holding the METRONOME [START/STOP] button. The volume of the metronome sound can be changed. After selecting "F5" or "F6", use the [-/NO] and [+/YES] buttons to set the metronome volume as required. The volume range is from 1 through 20. A setting of "1" produces minimum sound, while a setting of "20" produces maximum metronome volume. Press the [-/NO] and [+/YES] buttons simultaneously to recall the default setting "10". F6 CLP-930 Preset Song Part Cancel Volume F7 CLP-950 Preset Song Part Cancel Volume This function sets the volume at which a "canceled" part is played during preset song playback (see page 15 for information on the "part-cancel" function). Use the [-/NO] and [+/ YES] buttons to set the volume as required. The volume range is from 0 through 20. A setting of "0" produces no sound, while a setting of "20" produces maximum volume. Press the [-/ NO] and [+/YES] buttons simultaneously to recall the default setting "5". Adjust the part volume to a comfortable level to use the "canceled" part as a guide to play along with. Set to "0" if you don't want to hear the part. 32 CLP-950/930