Yamaha A-670 A-670/A-U670 Owner s Manual - Page 8
CONNECTIONS, Connecting a network CD player, Connecting speakers
View all Yamaha A-670 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 8 highlights
English CONNECTIONS CONNECTIONS Make sure to connect L (left) to L, R (right) to R, "+" to "+" and "-" to "-." If the connections are faulty, no sound may be heard from the speakers, and if the polarity of the speaker connections is incorrect, the sound may be unnatural and lack bass. Refer to the owner's manual for each of your components. Make sure to use RCA type cables, the supplied system connection cable, or a commercially available USB cables (A-U670 only) to connect audio components. CAUTION Do not connect this unit or other components to the main power until all connections between components are complete. Connecting a network CD player Connecting speakers As shown in the figure, connect the ANALOG OUT jacks of the network CD player (CDNT670) to the ANALOG IN jacks of the unit by using the RCA stereo cable supplied with the network CD player, and connect the SYSTEM jacks of the both equipment to each other by using the supplied system connection cable. When the SYSTEM jacks of the unit and the network CD player are connected to each other, you can use the remote control of the network CD player to operate the unit (+page 10). Connect the SPEAKERS terminals of the unit and the terminals of the speakers as shown in the figure. 5 En