Yamaha AX 497 Owner's Manual - Page 9

INTRODUCTION CONTROLS AND FUNCTIONS Remote control This section describes the function of each control on the remote control used to control this unit or a YAMAHA CD player, tuner, tape deck, etc. with the remote control capability. Note Some components may not be controlled by this remote control. 1 POWER CD/DVD PHONO TUNER STANDBY MD TAPE AUX 2 3 4 u + PRESET VOLUME 5 d - A/B/C/D/E 6 A/B DISPLAY w e f DISPLAY DIR A DIR B REC b s a DISC p CD TAPE 7 8 ■ Controlling this unit 1 Infrared signal transmitter Sends signals to this unit. 2 POWER Turns on this unit. Note This button is operational only when POWER on the front panel is pressed inward to the ON position. 3 STANDBY Sets this unit to the standby mode. Notes • This button is operational only when POWER on the front panel is pressed inward to the ON position. • In the standby mode, this unit consumes a small amount of power in order to receive infrared-signals from the remote control. 4 Input selector buttons Select the input source you want to listen to. 5 VOLUME +/- Controls the sound output level. This does not affect the REC OUT level. ■ Controlling other components The functions of the buttons to control other YAMAHA components are the same as those of the corresponding buttons on those components. Refer to those components' instruction manuals for details. 6 Tuner buttons Control various functions of the tuner. PRESET +/- Selects a preset station number (1 to 8). A/B/C/D/E Selects a preset station group (A to E). 7 CD player / tape deck buttons Control various functions of the CD player or the tape deck. Notes • DIR B and A/B apply only to the double cassette tape deck. • Pressing DIR A will reverse the tape direction on the single cassette tape deck with the automatic reverse function. 8 CD/TAPE selector switch Switches to control either CD player functions or tape deck functions. 5