Yamaha Audiogram3 Owners Manual - Page 13
Preparing to Record - audiogram 3 mac
View all Yamaha Audiogram3 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 13 highlights
Quick Guide 7 Select [VST Connections] from the [Devices] menu. Windows: If "Not Connected" is selected in the [Audio Device] field, click on the "Not Connected" indication, and then switch to [ASIO DirectX Full Duplex Driver]. Also set the [Outputs] in the same way, and then close the window. Mac: If "Not Connected" is selected in the [Audio Device] field, click on the "Not Connected" indication, and then switch to [USB Audio CODEC]. Also set the [Outputs] in the same way, and then close the window. 8 Select [Add Track] → [Audio] from the [Project] menu. The Add Audio Track dialog window appears. 9 Set the "Count" and "Configuration" parameters, and then click [Add Track]. The added tracks will appear. NOTE You will normally use a stereo track when recording synthesizers, and a monaural track when recording vocals or guitars. Preparing to Record 1 Click in the track list (the area in which the track names are displayed) to select a track to record on. The various settings for the selected track are available in the Inspector on the left side of the display. [Record Enable] button Track list Inspector AUDIOGRAM 3 Owner's Manual 13