Yamaha BD-A1020 Owners Manual - Page 86

SETUP menu Video Out Select You can select the video output resolution from HDMI, COMPONENT, and VIDEO. For more details on output formats, refer to "About the video output formats" (p. 39). HDMI When set to Auto, resolution is set to the maximum resolution according to the connected TV. When set to Disc Native, the original resolution and video frequency, recorded in the Blu-ray Disc or DVD that is played back, are used. You can use a video up-converter function of an external device. When other than a Blu-ray Disc or DVD is played back, the resolution and video frequency will work as Auto. If a Blu-ray Disc or DVD whose resolution and video frequency are not compatible with the connected TV, no image will be output. In this case, stop playback, and select an option other than Disc Native. Auto*, Disc Native, 480i/576i, 480p/576p, 720p, 1080i, 1080p COMPONENT You can select only 480p/576p or 480i/576i. 480p/576p, 480i/576i* VIDEO This works as same as 480i/576i. Notes - To output HD audio (Dolby TrueHD or DTS-HD Master Audio) from HDMI terminal, set Video Out Select to Auto or more than 720p. - If a TV is connected with an HDMI cable, default setting will be HDMI. - If a TV is not connected with an HDMI cable, default setting is VIDEO. TV System You can select TV System from PAL, NTSC and Multi. Set the same TV System as your TV set. For more details on output formats, refer to "About the video output formats" (p. 39). NTSC, PAL, Multi (The default setting differs depending on your model.) Color Space You can select the Color Space (p. 44) output from HDMI. This function is available when this Player is connected with an HDMI cable. YCbCr 4:4:4* Sets Color Space to YCbCr 4:4:4. YCbCr 4:2:2 Sets Color Space to YCbCr 4:2:2. Full RGB When RGB is set and white and black on the screen are too faint, select this item. This setting is effective when a connected component supports RGB 0-255 range. RGB Outputs video signal at normal signal range. Note - This function is only available on TVs that support this function. HDMI Deep Color When your TV and/or AV receiver is compatible with Deep Color (p. 44), set this item according to your TV/AV receiver. This function is available when this Player is connected with an HDMI cable. 30 bits, 36 bits, 48 bits, Off* HDMI 1080p 24Hz This outputs the BD-Video encoded in 24Hz frame rate in HDMI 1080p 24Hz. Smoother video playback may be available with this function. This function is available when your TV/AV receiver support this function, and this Player is connected with an HDMI cable. For more details on output formats, refer to "About the video output formats" (p. 39). Auto*, Off Note - This setting is disabled when output resolution is other than 1080p. Lip Sync You can set/adjust the Lip Sync (p. 45) function. Auto* This Player adjusts the Lip Sync function automatically. Manual You can adjust the Lip Sync function manually. You can set the delay of the audio for 2D and 3D contents independently. 2D 3D Off This Player does not adjust the Lip Sync function. Video Process Video Mode You can select Video Mode below. Standard* Vivid Cinema Custom The image is most natural and well-balanced. This mode suits for normal use. The image is more vivid and sharp. The image suits for watching movie in dark room. You can adjust the visual image manually. Press 5/a to select the parameter, then press 2/3 to adjust the figure. Brightness Adjusts the overall brightness of the image. Saturation Adjusts the richness of the color in the projected image. Hue Adjusts the tint of the projected image. Contrast Adjusts the bright areas (white levels) in the image. Sharpness Adjusts the sharpness of objects in the video. CTI Smoothes out the edges of color images. Color images are rendered more distinct. The default settings are 0. 36 En