Yamaha BD-S677 Owners Manual - Page 36

SETUP menu Connection Test You can perform an internet connection test. If the test is failed, please check "IP Setting" (p. 32) and perform the test again. IP Setting You can configure the network settings. Auto* Select to automatically configure the network settings of this Player with the DHCP server. Manual Select to configure the network settings (IP Address, Subnet Mask, Default Gateway, and DNS) manually. BD-Live Connection You can set access restriction to BD-Live contents. Permitted Allows all BD-Live discs to connect the network. Partial Allows only discs with owner certification. Permitted* Prohibited Prohibits all BD-Live discs to connect the network. ■ Display Setting Hints - Numeric keys Enters characters. - 2/3 Moves the highlight. - CLEAR Deletes a character. - ENTER Saves the settings and exits from the menu. Proxy Setting You can set Proxy Setting. Set to Disable for normal use. Set to Enable to set the proxy setting. Disable* Sets proxy server to disable. Select this item when proxy server is not used. Enable Enables proxy host and proxy port setting. Proxy Host Sets proxy host. Proxy Port Sets proxy port. Network Control Sets the control for devices, which are connected via Ethernet, to On/Off. When On with filter is selected, you can specify the MAC addresses of the network devices that will be permitted access to this Player. This Player employs Yamaha Network Control protocol (YNC). On*, On with filter, Off Notes - When Network Control is enable, power consumption during standby mode increases due to network control function. - When set to On, the system startup time is decreased. Network Standby You can select whether this Player can be turned on from other network devices such as "AV CONTROLLER" (p. 22). On, Off* The default settings are marked with " * ". TV 3D Output You can select 3D or 2D video output from this Player. Auto* This Player automatically selects 3D or 2D videos. Off This Player always selects 2D videos. Note - Even if you set "3D Output" to "Auto" and play back a Blu-ray 3D Disc, this Player selects 2D images depending on the setting of TV, etc. TV Screen You can set the screen aspect ratio of the connected TV, and adjust the video output. If you switch your TV (i.e. because you have bought a new one) and the screen aspect ratio of the connected TV changes, you will have to change the TV Screen setting. 16:9 Full Select this when this Player is connected to a TV with a 16:9 screen. When a 4:3 aspect ratio video is played back, the video is displayed as shown below. 16:9 Normal* Select this when this Player is connected to a TV with a 16:9 screen. When a 4:3 aspect ratio video is played back, the video is displayed as shown below. 4:3 Pan Scan Select this when this Player is connected to a TV with a 4:3 screen. When a 16:9 aspect ratio video is played back, the video is displayed as shown below. 4:3 Letter Box Select this when this Player is connected to a TV with a 4:3 screen. When a 16:9 aspect ratio video is played back, the video is displayed as shown below. Original image size On 16:9 (wide screen) TV 16:9 Full 16:9 Normal Note - This setting is available only when Network Control is enabled. DMC Control You can select whether to allow DLNA-compatible Digital Media Controller (DMC) (p. 15) to control this Player. Enable*, Disable 4:3 Original image size On 4:3 TV 4:3 Pan Scan 4:3 Letter Box 16:9 32 En