Yamaha C750 MCXSP10 Manual - Page 12

Getting Started Step1: Inserting batteries into the Remote Control 3 1 2 1 Open the battery compartment. 2 Insert two batteries type R06 or AA, following the indications (+ -) inside the compartment. 3 Close the cover. Using the remote control Remote control sensor Point the remote control at the sensor, within approximately 6 m (20 feet) of the unit. 30° 30° Step2: Turning on the power 1 Connect the AC power cord to the power outlet. 2 Turn on the TV and your AV receiver. 3 Select the appropriate input source at the AV receiver that was used to connect to this unit. Refer to the equipment owner's manual for detail. 4 Turn this unit on. 5 Set the TV to the correct Video IN channel. (e.g. EXT1, EXT2, AV1, AV2, AUDIO/VIDEO, etc. Refer to your TV owner's manual for detail) ➜ The front display lights up and the default screen appears on the TV. Step3: Selecting the color system that corresponds to your TV This DVD Player is compatible with both NTSC and PAL. Select the color system that matches your TV. VIDEO SETUP PAGE TV TYPE TV DISPLAY PROGRESSIVE PICTURE SETTING BLACK LEVEL CLOSED CAPTION PAL NTSC MULTI Handling the remote control • Do not spill water or other liquids on the remote control. • Do not drop the remote control. • Do not leave or store the remote control in the following types of conditions: - high humidity such as near a bath - high temperature such as near a heater or stove - extremely low temperature - dusty places 1 Press SETUP. 2 Press 2 repeatedly to select {VIDEO SETUP PAGE}. 3 Press 34 to highlight {TV TYPE}, then press 2. 8