Yamaha CD-NT670 CD-NT670 Owners Manual - Page 16
Configuring network connection, Selecting connection method
View all Yamaha CD-NT670 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 16 highlights
Configuring network connection Select a method of connecting to the network. You can play back music files stored on your PC, mobile devices, DLNA*-compatible NAS, or audio contents on the Internet, by connecting this unit to the network. You can also operate the unit with your mobile device. * Digital Living Network Alliance Selecting connection method Using "MusicCast CONTROLLER" to make connection You can set the network connection by using the free dedicated "MusicCast CONTROLLER" app installed to your mobile device. See "MusicCast Setup Guide" for details. With MusicCast CONTROLLER, you can use the following functions in addition to the network setting. • Play songs stored on computers (servers) • Select an Internet radio station • Distribute and receive audio between the unit and other Yamaha MusicCast devices Establishing connection by the unit operation You can also connect to the network by using the following methods beside using "MusicCast CONTROLLER". Connecting to wired network Setting wired network connection (& P.15). Connecting to wireless network Setting wireless network connection (& P.17). Connecting by Wireless Direct Setting the wireless direct connection with mobile device (& P.20). • It is recommended to use wired connection to keep a stable connection. • For details on Internet connection, refer to the owner's manuals of your network devices. • If you are using a router that supports DHCP, you do not need to configure any network settings for the unit. If you are using a router that does not support DHCP, configure the network setting from [Network Config] in the option setting (& P.40). • Some security software installed on your PC or the firewall settings of network devices (such as a router) may block the access of the unit to the network devices or the Internet. In this case, change the setting of the security software or network devices. • When setting the subnet manually, each server must be connected to the same subnet as the unit (& P.41). 12 En