Yamaha CD-NT670 CD-NT670 Owners Manual - Page 46
Updating the firmware
View all Yamaha CD-NT670 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 46 highlights
Updating the firmware When a new firmware for the unit is released, a message to update your current firmware will be shown on the front panel display (when the unit is connected to the Internet only). In this page, an updating method via a network using the option setting is shown. 1 Press . • The option menu is shown on the front panel display. 2 Select [Firmware Update] with S/T, and press . 3 Select [Update] with S/T and press . 4 Select [Network] with S/T, and press . • Press ENTER again, then update starts. • When update finishes, messages are shown in the following order: "UPDATE SUCCESS", "PLEASE ...", and "POWER OFF!" 5 Press A on the front panel. • Update is applied. 1 OPTION 2, 3, 4 S/T ENTER • Do not operate the unit or disconnect the power cable and network cables while updating. • When Internet speed is not fast enough or the unit is connected to the wireless network via a wireless network adapter, network update may not be possible depending on the condition of the wireless connection. In this case, try again or update the firmware using a USB memory device. The firmware can be downloaded from the Yamaha Website. To update the firmware using a USB memory device You can download the firmware to the USB memory device, and connect that USB memory device to the USB jack on the unit. • Select [USB] in step 4 to start the update. 42 En