Yamaha CDC-685 Owner's Manual - Page 19

PLAYING CDS Adjusting the Level CDC-685 only s Adjusting the level of signals output into an amplifier, etc. You can adjust the level of sound signals output from the LINE OUT terminals on the rear panel into an amplifier, etc. as you prefer by using the OUTPUT LEVEL -/+ buttons. - OUTPUT LEVEL - - OUTPUT LEVEL or On the front panel For optimum sound quality * When the DIGITAL AUDIO OUT (OPTICAL) terminal is used for the connection, set the level of output signals to max. * The level of output signals can be checked in the display. CK 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 VARIOUS FUNCTIONS Timer Play CDC-685 only You can start play at any specified time by connecting a timer (sold separately). Refer also to the instructions for the timer. 1 Select the desired play mode (1DISC or 5DISCS). 2 Press the POWER switch to turn the unit off. 3 Press the POWER switch while pressing the w/d button on the front panel. Shortly thereafter, "TIMER P. ON" appears in the display and the timer play function is on. (When the timer play function is already on, in which case, "TIMER P. OFF" appears in the display and timer play function is off. In this case, repeat the procedure in steps 2 and 3 to set the timer play function to on.) 4 Set the timer to the desired time. When the set time comes, the unit turns on and starts play. NATURAL SOUND COMPACT DISC PLAYER POWER PHONES PROG 1 2 3 4 5 +10 6 7 8 9 0 PEAK DISC 1 2 3 4 5 OUTPUT LEVEL PLAYXCHANGE CDC-685 only 2,3 3 s When you listen with headphones Connect the headphones to the PHONES jack and adjust the volume by using the OUTPUT LEVEL -/+ buttons. * Note that the use of the OUTPUT LEVEL -/+ buttons will also vary the level of the signal output to an amplifier, etc. PHONES English E-15