Yamaha CDR-S1000 Owner's Manual - Page 23

English Finalization Finalization is the process that concludes recording, and allows a CD-R disc to be played on a standard CD player. (Please note that CD-RW discs can only be played on a CD-RW compatible player even after finalization has been performed. CD-RW discs cannot be played on a standard CD player.) • Please note that once a CD-R disc is finalized, recording is no longer possible. Please ensure the disc is in its final form before performing finalization. • If the power is turned off or interrupted during finalization, the recorded material may be lost and the disc may not be usable. NATURAL SOUND CD RECORDER CDR-S1000 TRACK NO. EFFECT REC MODE POWER FINALIZE ERASE DISPLAY FINALIZE CD DIRECT REC MUTE OPEN/CLOSE / REC INPUT OPTICAL COAXIAL ANALOG REC LEVEL DIGITAL/ANALOG MIN MAX / / PHONES LEVEL 0 10 ^ & FINALIZE STOP & TRACK NO. OPEN/ REC MODE WRITE DIMMER DISPLAY CLOSE EFFECT REPEAT RANDOM CLEAR PROG 1 2 3 INDEX 4 5 6 +10 7 8 9 0 FINALIZE ERASE REC REC MUTE SEARCH SKIP STOP PAUSE PLAY PLAY # RECORDING FUNCTIONS To finalize a CD-R or CD-RW disc 1 Load a recorded (but not finalized) CD-R or CD-RW disc. • Before loading the disc, make sure there are no scratches, dust, fingerprints or similar marks on the disc. If necessary, clean the disc as described on page 29. 2 Press FINALIZE. CD-R CD 32 44 148 PROG RNDM REPEAT SF TOTAL REMAIN SINGLE ALL AUTO EFFECT REC SYNC X2 X4 L dB -00 -60 R -30 -10 -6 -4 -2 -1 0 OVER • If you want to cancel finalization, press & (STOP & on the remote). 3 Press ^ (PLAY # on the remote) to start the finalization procedure. • The remaining time required for finalization to complete is displayed. Finalization can usually be completed within about 2 minutes. • When CD-R disc finalization is complete, the CDR indicator changes to the CD indicator in the display, and the recorder is put in the stop mode. • When CD-RW disc finalization is complete, the TOC indicator lights in the display, and the recorder is put in the stop mode. Notes on finalization • Once the finalization process has started, no other operation is possible until finalization has been completed. • If the disc is marked or scratched, finalization may not be possible. • Do not turn off the power or disconnect the power during finalization. E-20