Yamaha CDR-S1000 Owner's Manual - Page 25
All Track Erase, TOC Erase, Disc Erase
View all Yamaha CDR-S1000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 25 highlights
All Track Erase 1 Load a CD-RW disc that has been recorded on. • This function is not possible on a finalized CD-RW disc. 2 Press ERASE until "Erase ALL?" appears on the display. • If you want to cancel the Erase mode, press & (STOP & on the remote). 3 Press ^ (PLAY # on the remote) to start the All Track Erase process. • This process requires from several seconds up to 3 minutes depending on the amount of recorded material. • During All Track Erase, "Erase" and the remaining time to completion appear in the display. 4 The recorder stops when All Track Erase is complete. TOC Erase 1 Load a CD-RW disc that has been finalized. 2 Press ERASE. • "Erase TOC?" appears in the display. • If you want to cancel the Erase mode, press & (STOP & on the remote). 3 Press ^ (PLAY # on the remote) to start the TOC Erase process. • This process requires approximately 1 minute to complete. • During TOC Erase, "Erase" and the remaining time to completion appear in the display. 4 The recorder stops when TOC Erase is completed. Note • When TOC Erase is complete, the TOC indicator goes out. Disc Erase 1 Load a CD-RW disc that has been recorded on. • The CD-RW disc may be finalized or not. 2 Press and hold ERASE for about 2 seconds. • "Erase DISC?" appears in the display. • If you want to cancel the Erase mode, press & (STOP & on the remote). 3 Press ^ (PLAY # on the remote) to start the Disc Erase process. • This process requires approximately one-fourth the total time on the disc. 4 The recorder stops when Disc Erase is completed. RECORDING FUNCTIONS E-22 English