Yamaha CDX-9 Owner's Manual - Page 14

TRACK PROGRAMMING FOR RECORDING TO TAPE This convenient feature can be used to program tracks on a disc for recording to tape. By only memorizing the tape's total possible recording time, the unit will automatically program tracks or help you to program tracks so they will fit onto the tape with the least amount of unrecorded space remaining at each end of the tape. Ⅲ Automatic tape-programming The unit will automatically program tracks on a disc with the original order of tracks unchanged. 3 2 5 1 SYNCHRO DIMMER TIME OPEN/ CLOSE SPACE PEAK TAPE CLEAR PROG 1 2 3 INDEX 4 5 6 +I0 7 8 9 0 REPEAT RANDOM SEARCH SKIP STOP PAUSE PLAY 4 7 6, 7 1 Stop the unit. STOP 4 If you desire, you can also enter the tape's total possible recording time manually after you select a preset tape length in step 3. Example: For a C-64 tape (32 minutes on each side) 6 4 + 5 Press the REPEAT button. REPEAT The unit automatically programs tracks for side A and side B separately considering the tape's total time. * The display shows momentarily the programmed track numbers, the total number of programmed tracks and the total time of programmed tracks for side A and B respectively. * The peak level searching function of this unit is useful for adjusting recording level on the tape deck. (Refer to page 17.) 2 If you desire, you can automatically insert additional time space between tracks. (Refer to page 9.) SPACE SPACE 3 Enter the tape's total possible recording time. TAPE 6 Begin recording on the tape deck and press the PLAY button on this unit at the same time. 7 The unit will pause at the end of side A of the tape. Turn the tape over to side B. Resume recording and, at the same time, press the PLAY or PAUSE button on this unit. Notes • All tracks may not be programmed if the tape's length is not enough. To program all tracks, use a longer tape. • CD synchronized recording function can be used if your tape deck is compatible with it. If so, in step 6 and 7, press the SYNCHRO button and then press the PLAY button on this unit's remote control transmitter. Recording automatically begins. (For details, refer to page 18.) Display information (at step 5) 1 2 3 PROGRAM A TOTAL You can select any of four preset tape lengths by pressing the TAPE button. TAPE (off) 1 Shows the number of programmed tracks for each side in turn just after the automatic programming is finished, and then it is replaced by the number of the first programmed track for side A. 2 Shows the total time of programmed tracks for each side. 3 Shows the side of the tape. Note on tape programming To check, cancel or correct program data, refer to page 13. * In checking the program data, note that "Pu" appears between track numbers for side A and side B. 14