Yamaha CDX-9 Owner's Manual - Page 7
Basic Operation - index
View all Yamaha CDX-9 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 7 highlights
English This manual describes how to operate this unit by using the remote control transmitter. To operate this unit on the front panel, use the corresponding buttons on the front panel. BASIC OPERATION 1 STANDBY/ON 1 Turn the power on. STANDBY/ON SYNCHRO DIMMER TIME OPEN/ CLOSE SPACE PEAK TAPE CLEAR PROG 1 2 3 INDEX 4 5 6 +I0 7 8 9 0 REPEAT RANDOM SEARCH SKIP STOP PAUSE PLAY 2, 3 4 3 Close the disc tray. OPEN/ CLOSE 2 Load a disc. Label side upward 4 OPEN/ CLOSE PLAY Display information at disc play Disc tray 1 2 Play will begin from the first track of the disc. Notes • After closing the disc tray by pressing the OPEN/CLOSE button, the display shows the total number of tracks and the total recorded time of the disc for a few seconds. 1 Shows the track number selected or being played. 2 Shows the time displays. (Refer to "Selecting time displays" on page 10.) TOTAL • Additionally, you can close the disc tray by pressing the PLAY (PLAY/PAUSE) button, a numeric button or the RANDOM button, or by pressing the front edge of the disc tray gently. If the tray is closed in these ways, play will begin automatically, however, the display will not show the total number of tracks and the total recorded time of the disc. When you finish using this unit Press the STANDBY/ON switch again to turn this unit into the standby mode. Standby mode In this state, this unit is not disconnected from the source as long as it is connected to the wall outlet, even if this unit itself is turned off. 7