Yamaha CDX-E100RDS Owner's Manual - Page 15
Optional settings for RDS functions
View all Yamaha CDX-E100RDS manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 15 highlights
Optional settings for RDS functions The tuner has the following functions which make use of the RDS data service. These are originally in operation ON. However, you can turn these functions OFF, if so desired. SLEEP A REP D PEAK TIME B RNDM DISP C PROG E TAPE DISP FREQ PS/ PTY/RT/CT TUNER FREQ PS/PTY/RT/CT PTY SEEK MODE START VOLUME TAPE MD AUX CD TUNER MD REC PRESET PTY SELECT TAPE REC TAPE PTY SEEK MODE PTY SEEK START MODE DUBBING START RECEIVING RDS STATIONS • If you receive an RDS station of some other country, the built-in clock is synchronized with the time setting of the country. • If the built-in clock is not yet set for the current time or reset due to a power failure, etc., it will be set for the time deoffsthe CT data automatically, whether this setting is ON or OFF. 2. LOCAL = CT (ON/OFF) If the RDS station being received employs the local time (summer time, etc.) data service, its time is displayed in the CT mode. GettPilnagyiSntgarCtDeds 3. A.M. = RDS (ON/OFF) RDS stations are searched instead of all FM stations by the automatic preset tuning operation when the setting is ON. (Refer to page 10.) 4. RT SPEED: ±0 Changes the scrolling speed of the radio text decreasing the value and, in turn, reducing the speed. English 1 Select the FM band by pressing TUNER. 2 Press DISP to display the current time. 3 Press FREQ PS/PTY/RT/CT. 4 Each time you press PTY SEEK MODE the display will change as follows: 1. CT = CLOCK (ON/OFF) The tuner corrects the time of the built-in clock automatically by synchronizing it with the CT data on the RDS station being received. Control Range: ±0 to ±3 (Preset value: ±0) 5 Choose the function ON or OFF by pressing PTY SEEK START, confirming it in the display. Press PTY SEEK START repeatedly to change the value for RT SPEED. • If there is no operation for about 20 seconds, this mode is cancelled and turns into the frequency display. If the station has PS data, it turns into the PS mode. 6 Press FREQ PS/PTY/RT/CT again to restore the frequency display mode. E-13