Yamaha CGP-1000 Owner's Manual - Page 14
Playing the Keyboard - clavinova
View all Yamaha CGP-1000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 14 highlights
Introduction Playing the Keyboard 1 Connecting the power cable First insert the plug of the power cable into the AC connector on the Clavinova, then plug the other end of the cable into the proper AC outlet on the wall. (The shape of the plug and outlet differ depending on locale.) 2 Opening the key cover Using the hand grip on the front, lift open the key cover. If you want to play in this condition (with the panel unopened), go on to step 4. CAUTION Hold the cover with both hands when opening or clos- ing it. Do not release it until it is fully opened or closed. Be careful to avoid catching fin- gers (yours or others, espe- cially children's) between the cover and the unit. 3 CAUTION Do not place objects such as a piece of metal or paper on top of the key cover. Small objects placed on the key cover may fall inside the unit when the cover is opened and may be nearly impossible to remove. This could cause electric shock, short circuit, fire or other serious damage to the instrument. CAUTION Be careful to avoid catching your fingers when opening the cover. Opening the panel Fold down the hand grip. Fold down the hand grip at the top (as shown), then grip the key cover at the bottom and lift it, gently pushing it inside the CGP-1000, revealing the control panel. CAUTION Be careful to avoid catching your fingers when opening the cover. 4 Turning the power on Press the [POWER] switch located on the right of the keyboard to turn the power on. The display located in the center of the front panel and the power indicator located below the left end of the keyboard lights up. The power indicator lights up. 14 CGP-1000 Owner's Manual