Yamaha CGP-1000 Owner's Manual - Page 210
Removing the CGP-1000 from its Case and Assembling the Unit
View all Yamaha CGP-1000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 210 highlights
Removing the CGP-1000 from its Case and Assembling the Unit CAUTION • Be careful not to confuse parts, and be sure to install all parts in the correct orientation. Please assemble in accordance with the sequence given below. • Assembly should be carried out by at least four persons. • Be sure to use the correct screw size, as indicated below. Use of incorrect screws can damage the instrument. • Be sure to tighten all screws upon completing the assembly of each unit. • To disassemble, reverse the assembly sequence given below. Have a Phillips (+) screwdriver and a hexagonal wrench ready. 1 Remove the parts shown below from the box. 2 1 2 Remove the brackets 3 4 5 1 Cut the bands. 2 Remove the top cover. 3 Remove the front screws. 4 Remove the side screws. 5 Pull off the cover. 6 Remove the parts. Leg × 3 6 Pedal Unscrew the brackets. 3 Attach the right front and rear legs. 1 Attach and securely tighten the right front leg with the 70mm hexagon bolts. 70mm hexagon bolt × 4 92mm hexagon bolt × 2 Pedal brace rod × 2 4.0 × 20mm screw × 4 AC power cord 2 Attach and securely tighten the rear leg with the 92mm hexagon bolts. Appendix 210 CGP-1000 Owner's Manual