Yamaha CLP-535 Owner's Manual - Page 112
Mount A., Secure A., that were attached in step 2-1.
View all Yamaha CLP-535 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 112 highlights
Assembling the Clavinova 2-1. Align the screw holes on the upper side of B 4. Secure A. with the bracket holes on D and E, then attach the upper corners of B to D and E by finger- tightening two thin screws (4 × 12 mm). 2-2. Secure the bottom end of B using four 4-1 A tapping screws (4 × 20 mm). 2-3. Securely tighten the screws on the top of B that were attached in step 2-1. A 3. Mount A. Be sure to place your hands at least 15 cm away from either end of the main unit when positioning it. Align the screw holes. 4-2 A 4-1. Adjust the position of A so that the left and right ends of A will project beyond D and E equally (as seen from the front). 4-2. Secure A by tightening six thick screws (6 × 20 mm) from the front. At least 15 cm CAUTION • Be extra careful not to drop the main unit or let your fingers be pinched by it. • Do not hold the main unit in any position other than the position specified above. 112 CLP-585/575/545/535/565GP Owner's Manual