Yamaha CLP-535 Owner's Manual - Page 76
Automatic Setup by WPS, Manual Setup
View all Yamaha CLP-535 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 76 highlights
Connections Automatic Setup by WPS Please make sure to connect the USB wireless LAN adaptor (sold separately) to the USB [TO DEVICE] terminal, otherwise the displays for setup will not be shown. If your access point supports WPS, you can easily connect the instrument to access point by WPS, without making settings, such as password input, etc. Press the WPS button on the USB wireless LAN adaptor, then press the WPS button on your access point within two minutes. When connection is done successfully, "Completed" is shown in the display, and the Voice display will be shown. Finally, connect the iPhone/iPad to the access point referring to the "iPhone/ iPad Connection Manual" on the website (page 9). NOTE WPS setup cannot be available while the instrument is in the specific mode as follows: • When in the Demo mode, or while a Song is playing back or being paused temporarily, or while the instrument is in the Song Recording mode. • When Wireless LAN mode is set to "Accesspoint Mode" in the System Menu. Manual Setup Make sure to connect the USB wireless LAN adaptor (sold separately) to the USB [TO DEVICE] terminal, otherwise the displays for setup will not be shown. 1. To call up the network list, perform steps 1 - 2 in the "Displaying the Networks in the wireless LAN and connecting to the Network" (page 75). 2. Select "Other" at the bottom of the wireless list, then press the [>] button. 3. Set the SSID, Security and Password to the same as the settings on the access point. 3-1. Select the "SSID" then press the [>] button to call up the display for SSID input, then enter the SSID. For details on how to enter the characters, refer to "Renaming files" on page 66. After entering the SSID, press the [MENU] button to finalize the setting. Operation returns to the "Other" display. 76 CLP-585/575/545/535/565GP Owner's Manual