Yamaha CRX-B370 CRX-B370_B370D Owners Manual - Page 15
Preparations, Connecting speakers
View all Yamaha CRX-B370 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 15 highlights
Preparations Connect speakers, the antenna, etc. and turn the unit on. Do not connect the power cord of the unit until you have finished connecting all cables. Connecting speakers 1 Remove the insulation from the ends of the speaker cables to expose the bare wires. 15 mm (5/8 in.) Right speaker SUBWOOFER OUT Left speaker 12 3 2 Connect speakers to the unit, as the illustration shows. • Prepare speakers, subwoofer and speaker cables separately. • See documentation provided with the speakers for more information. Speaker cable Subwoofer Monaural pin cable Caution • If the bare speaker wires touch each other or any metal part of the unit, it could damage the unit and/or the speakers. • Use speakers of at least 6 Ω impedance. Note • Make sure that left and right (L, R) connections and polarity (red: +, black: -) are correct. If connections are incorrect, the sound will be unnatural. • You can also connect a subwoofer to the unit (it must have a built-in amplifier). En 15