Yamaha CRX-N560 CRX-N560 Owners Manual - Page 11
Connecting to the network
View all Yamaha CRX-N560 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 11 highlights
Preparations English Connecting to the network You can play back music files stored on your PC, mobile devices, DLNA*-compatible NAS, or audio contents on the Internet, by connecting this unit to the network. You can also operate the unit with your mobile device. * Digital Living Network Alliance Connect the unit to the network as shown on the right. • Connect with a commercially available STP (shielded twisted pair) network cable (CAT-5 or higher, straightthroughcable). This unit Mobile device Internet Modem PC LAN Broadband router Network cable WAN Network attached storage (NAS) • For details on Internet connection, refer to the owner's manuals of your network devices. • If you are using a router that supports DHCP, you do not need to configure any network settings for the unit. If you are using a router that does not support DHCP, configure the network setting from [Network Config] in the option setting (& P.31). • Wired connections are recommended for devices other than the mobile to ensure high sound quality. • Some security software installed on your PC or the firewall settings of network devices (such as a router) may block the access of the unit to the network devices or the Internet. In this case, change the setting of the security software or network devices. • When setting the subnet manually, each server must be connected to the same subnet as the unit (& P.32). En 11