Yamaha CRX-N560 CRX-N560 Owners Manual - Page 32

Option settings Option menu list Menu Sub menu Preset Delete*1 (& P.24) Equalizer (& P.22) EQ Low EQ Mid EQ High Balance (& P.22) Music Enhancer (& P.22) Timer Setting (& P.28) Network Status Network Info MAC Address System ID Network Name Default Function Deletes preset stations. 0 Adjusts low frequency. 0 Adjusts middle frequency. 0 Adjusts high frequency. CENTER Adjusts the volume balance of the left and right speakers. OFF Enables/disables Music Enhancer. Sets the wake-up timer. Shows connection status of the unit and network. Shows MAC address. Shows the system ID. Shows the name of the unit that appears on the network. Menu Network Config System Config Sub menu Default Function DHCP Enabled YES Enables/disables DHCP. IP Address 0.0.0.0 Confirms and sets the IP address. Subnet Mask 0.0.0.0 Confirms and sets the subnet mask. Def. Gateway 0.0.0.0 Confirms and sets the default gateway. DNS Server(P) 0.0.0.0 Confirms and sets the primary DNS server. DNS Server(S) 0.0.0.0 Confirms and sets the secondary DNS server. Clock Setting Sets clock of this unit (& P.27). Power Saving Eco Sets the eco standby (& P.12). Auto Power Off Timer 8H Sets the unit into standby mode automatically (& P.12). Use Accessory NO Selects whether or not to supply power to a Yamaha accessory connected through the DC OUT jack. Firm Version Shows the firmware version of the unit. Firm Update Network Updates the firmware of the unit (& P.30). Advanced Setup (& P.31) MAC Add.Filter Factory Reset Specifies the MAC address (up to 5) and restricts access OFF to this unit of network components. (Operation with AirPlay is not affected even if [MAC Add.Filter] is set to [ON].) Resets the unit's settings to factory default. *1 Only when the radio is played back 32 En