Yamaha CVP-208 Owner's Manual - Page 156
Connecting Audio & Video Devices, the Clavinova AUX IN jacks
View all Yamaha CVP-208 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 156 highlights
Using Your Clavinova with Other Devices 345 Connecting Audio & Video Devices You can connect the Clavinova to a wide range of audio equipment by using the AUX IN and AUX OUT jacks, which are located at the bottom left of the instrument. Connect as shown in the illustrations below using standard audio cables. 4 Outputting the sound of an external device through the built-in speakers of the Clavinova (AUX IN jacks) CAUTION When the Clavinova's AUX IN jacks are connected to an external device, first turn on the power of the external device, then that of the Clavinova. Use audio cables and adaptor plugs with no resistance. CAUTION When the Clavinova AUX OUT jacks are connected to an external audio system, first turn on the power to the Clavinova, then to the external audio system. Reverse this order when you turn the power off. Clavinova L L+R R AUX IN Phone plug (standard) Tone generator LINE OUT Audio cable 3 Playing the sounds of the Clavinova through an external audio system, and recording the sounds to an external recorder (AUX OUT jacks) • The Clavinova's [MASTER VOLUME] setting affects the input signal from the AUX IN jacks. • If you connect the Clavinova to a monaural device, use only the AUX IN L/L+R jack. CAUTION Never connect the Clavinova AUX OUT jacks to its AUX IN jacks, either directly or via external audio equipment. Such connections could result in a feedback loop that will make normal performance impossible, and may even damage the Clavinova. Clavinova L+R R (LEVEL FIXED) L R Cassette tape recorder stereo system AUX OUT Phone plug (standard) RCA pin plug Audio cable AUX IN RCA pin plug To powered speaker When these are connected (with standard phone plugs), you can use the [MASTER VOLUME] control to adjust the volume of the sound output to the external device. When these are connected (with RCA pin plug; LEVEL FIXED), the sound is output to the external device at a fixed level, regardless of the [MASTER VOLUME] control setting. 5 Showing the display of the Clavinova on a connected TV monitor (VIDEO OUT) You can connect the Clavinova to a television or video monitor to display the lyrics in your song data or LCD on a larger screen. The particular contents of the display can also be set (page 147). • For information on setting the video standard (NTSC or PAL), refer to page 147. The default setting is "PAL." • Use an audio-video cable with good high-frequency characteristics and RCA-type pin jacks to connect the Clavinova to a television or video monitor. RCA pin plug L L+R R AUX PEDAL VIDEO OUT AUX IN RCA pin plug VIDEO IN Television • If you connect the Clavinova to a monaural device, use only the AUX OUT L/L+R jack. 156 CVP-210/208