Yamaha CVP-208 Owner's Manual - Page 158
Using the USB terminal, About the USB driver - midi driver
View all Yamaha CVP-208 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 158 highlights
Using Your Clavinova with Other Devices Using the USB terminal Connect the USB terminal of a computer to the USB terminal of the CVP-210/208 using a USB cable. Make sure to use a standard USB cable with the USB logo. Clavinova USB cable NEC MultiSync PC-9821 AS NEC About the USB driver You must install the specified USB driver (YAMAHA USB MIDI Driver) to your computer before you can transfer data between the computer and the CVP-210/ 208. You can download a copy of the YAMAHA USB MIDI Driver free of charge from the XG Library on the Yamaha Web site (http://www.yamaha-xg.com). CAUTION If you are using a USB cable to connect the Clavinova to your computer, you must connect the USB cable before turning on the power of the instrument. Also, do not turn the power of the Clavinova on/off while any application software that uses USB or MIDI is running. If you turn the power of the Clavinova on or off or connect/disconnect the USB cable in the following states, problems will occur in the computer system, possibly causing it to "freeze" (hang up), or causing the Clavinova to stop functioning. • While installing the driver. • While starting or shutting down the operating system. • While the computer is in an energy-save or sleep mode. • When a MIDI application program is starting. Make sure NOT to perform any of the following operations. Otherwise, the computer may lock up or the Clavinova functions may be disabled. • Turning the power on/off, or connecting/disconnecting the cable too often. • Shifting to energy-save or sleep mode while MIDI data is being transferred, or returning from sleep mode. • Disconnecting/connecting the cable while the Clavinova is on. • Turning the power of the Clavinova on/off, starting up your com- puter, or installing the driver while a large amount of data is being transferred. Using the MIDI terminals When using a MIDI interface device installed in the personal computer, connect the MIDI terminals of the personal computer and the CVP-210/208 with standard MIDI cables. • When the computer has a MIDI interface installed, connect the MIDI OUT terminal of the personal computer to the MIDI IN terminal. Clavinova MIDI IN MIDI OUT MIDI OUT MIDI IN NEC MultiSync PC-9821 AS NEC • When using a MIDI interface with a Macintosh series computer, connect the RS-422 terminal of the computer (modem or printer terminal) to the MIDI interface, then connect the MIDI OUT terminal on the MIDI interface to the MIDI IN terminal of the CVP210/208, as shown in the diagram below. Clavinova MIDI IN MIDI OUT RS422 MINI DIN 8-pin • When using a Macintosh series computer, set the MIDI interface clock setting in the application software to match the setting of the MIDI interface you are using. For details, refer to the owner's manual for the particular software you are using. • The Clavinova will begin transmission a short time after the USB connection is made. • When using a USB cable to connect Clavinova to your computer, make the connection directly without passing through a USB hub. • Depending on the state of your computer, the operating state of Clavinova may become unstable. Do not use your computer in a way that causes it to enter an unstable state. 158 CVP-210/208