Yamaha DKC-900 Disklavier Control Unit DKC-900 Owners manual - Page 29

Wired Network Connection Getting Started Chapter 2 English If your wireless router (access point) does not support WPS, you can connect this product to a wireless router (access point) using an Ethernet cable. 1 Press the [1] (Standby/On) button to turn the power off. 2 Connect the wireless router (access point) to the [LAN] port on the control center unit using an Ethernet cable. Control center unit Ethernet cable Wireless router (access point) Note: To ensure proper security, when connecting this product to the Internet, be sure to connect via a router, etc. Set an appropriate password for the router, etc. being used. Do not connect directly to the communication circuits (including public line LAN) of the telecommunications carriers (mobile telecommunication companies, fixed-line telecommunication companies, Internet providers, etc.). 3 Enable the DHCP server function on the wireless router (access point). 4 Press the [1] (Standby/On) button to turn the power on. Connection between this product and the wireless router (access point) is automatically established in approximately 15 to 20 seconds. 5 Open the Wi-Fi setting screen on your smart device. 6 Enable the Wi-Fi function. Note: For details on the DHCP setting, refer to the owner's manual supplied with your wireless router (access point). Note: For details on the Wi-Fi setting, refer to the owner's manual supplied with your smart device. 7 From the displayed network list, tap the network to which this product is connected. If necessary, enter a password, and then connect. 23