Yamaha DSP-A1092 Owner's Manual - Page 26

CONNECTING TO S VIDEO JACKS If your video cassette recorder, LD player, etc. and your monitor are equipped with "S" (high-resolution) video terminals, connect them to this unit's S VIDEO jacks, and connect this unit's S VIDEO MONITOR OUT jack to the "S" video input of your monitor. Otherwise, connect the composite video jacks from your video cassette recorder, LD player, etc. to the VIDEO jacks of this unit, and connect this unit's VIDEO MONITOR OUT jack to the composite video input of your monitor. NOTE: If video signals are sent to both S VIDEO input and VIDEO input jacks, the signals will be sent to their respective output jacks independently. NOTE: If your unit is the General Model, be sure the NTSC/PAL switch has been correctly set to the standard that your video equipment employs. Other models have no switch and use the PAL standard. Notes about the Video superimpose q If you watch a video source that is connected to both S VIDEO and VIDEO input jacks of this unit, signals of screen display information are output from only the S VIDEO MONITOR OUT jack. q When no video signal is input to either S VIDEO or VIDEO input jacks of this unit, signals of screen display information are output from both S VIDEO MONITOR OUT and VIDEO MONITOR OUT jacks with a color background. * For the General Model, if the NTSC/PAL switch on the rear panel is set to "PAL", nothing will be output from either S VIDEO MONITOR OUT or VIDEO MONITOR OUT jack in this case. 24 S-VIDEO IN VIDEO IN S-VIDEO OUT VIDEO IN S-VIDEO IN VIDEO IN S-VIDEO IN VIDEO OUT S-VIDEO OUT LD (DVD) player VIDEO OUT S-VIDEO OUT Video cassette recorder 1 TV/Satellite tuner AUDIO SIGNAL VIDEO SIGNAL VIDEO S VIDEO VIDEO OUT DVD/LD TV/DBS DVD/LD TV/DBS S-VIDEO OUT VIDEO OUT IN VCR 1 OUT IN VCR 1 OUT IN VCR 2 OUT MONITOR OUT IN VCR 2 OUT MONITOR OUT PAL NTSC Video cassette recorder 2 Monitor TV