Yamaha DSP-E390 Owner's Manual
Yamaha DSP-E390 Manual
 |
View all Yamaha DSP-E390 manuals
Add to My Manuals
Save this manual to your list of manuals |
Yamaha DSP-E390 manual content summary:
- Yamaha DSP-E390 | Owner's Manual - Page 1
Safety Instructions 2 Supplied Accessories 3 Profile of This Unit 4 Speaker Setup 5 Connections 6 Identification of Controls .......... 9 Speaker Balance Adjustment 10 Using Digital Sound Field Processor (DSP 12 Notes about the Remote Control Transmitter 15 Troubleshooting 16 Specifications - Yamaha DSP-E390 | Owner's Manual - Page 2
such as radiators, stoves, or other appliances that produce heat. 10 Power Sources - The unit should be connected to a power supply only of the type described in the operating instructions or as marked on the unit. 11 Power-Cord Protection - Power-supply cords should be routed so that they are not - Yamaha DSP-E390 | Owner's Manual - Page 3
product, when installed as indicated in the instructions contained in this manual, meets FCC requirements. Modifications not expressly approved by Yamaha may void your authority, granted by the FCC, to use the product. 2. IMPORTANT : When connecting this product to accessories and/or another product - Yamaha DSP-E390 | Owner's Manual - Page 4
in automatic input balance control. This circuit always presents you the best surround conditions without performing manual adjustments. Dolby Pro Logic Surround + DSP You can also enjoy a combination of Dolby Pro Logic Surround and DSP in the sound field program " PRO LOGIC ENHANCED". It recreates - Yamaha DSP-E390 | Owner's Manual - Page 5
to the "NORMAL" or "WIDE" position. (For details, refer to page 10.) 4-Speaker Configuration The center speaker is not used in this configuration. If the digital sound field program DOLBY PRO LOGIC or DOLBY PRO LOGIC ENHANCED is selected, the center sound is output from the left and the right front - Yamaha DSP-E390 | Owner's Manual - Page 6
to the owner's manual for each component to be connected to this unit. • Choose one of the following three ways to connect this unit to your amplifier. A Connecting to an Integrated Amplifier or Stereo Receiver with PRE OUT and MAIN IN terminals Front speakers Left Right Integrated amp. PRE OUT - Yamaha DSP-E390 | Owner's Manual - Page 7
connect this unit to the amplifier or receiver tape REC OUT and TAPE PB terminals. If your system includes a tape deck which have been displaced by connecting Connecting to a Control Amplifier and Power Amplifier Front speakers Left Right Front speakers Left Right Power amp. Integrated amp. - Yamaha DSP-E390 | Owner's Manual - Page 8
the LOW PASS terminal to the INPUT terminal of the subwoofer amplifier, and connect the speaker terminals of the subwoofer amplifier to the subwoofer. With some subwoofers, including the Yamaha Active Servo Processing Subwoofer System, the amplifier and subwoofer are in the same unit. CENTER OUTPUT - Yamaha DSP-E390 | Owner's Manual - Page 9
IDENTIFICATION OF CONTROLS FRONT PANEL POWER NATURAL SOUND DIGITAL SOUND FIELD PROCESSOR DSP-E390 l PRO LOGIC ENHANCED DELAY WIDE ms CINEMA DSP DIGITAL SOUND FIELD PROCESSOR TEST CENTER MODE PROGRAM EFFECT TAPE MONITOR CENTER LEVEL 0 I0 REAR LEVEL 0 I0 VOLUME l8 l6 l4 20 l2 - Yamaha DSP-E390 | Owner's Manual - Page 10
output level heard at the listening position will be the same from each speaker. This is important for the best performance of the digital sound field processor. 2 53 1 64 4 6 PROGRAM PRO LOGIC - ENHANCED CNCT VIDEO MONO MOVIE SUR. ROCK HALL EFFECT ON/OFF TEST CENTER MODE DELAY TIME - Yamaha DSP-E390 | Owner's Manual - Page 11
you have completed these adjustments, you can adjust whole sound level on your audio system by using the VOLUME control (or the MASTER VOLUME keys on the remote control transmitter). q If you use external power amplifiers, their volume controls may also be adjusted to achieve proper balance. q In - Yamaha DSP-E390 | Owner's Manual - Page 12
/viewing room. This digital sound field processor has 6 programs; 4 programs for digital sound field processing and 2 programs for the Dolby Pro Logic Surround sound system (DOLBY PRO LOGIC and DOLBY PRO LOGIC ENHANCED). You can create an excellent audio sound field by selecting the suitable - Yamaha DSP-E390 | Owner's Manual - Page 13
with the digital sound field processor 6 3 1, 7 6 TAPE MONITOR PROGRAM PRO LOGIC - ENHANCED CNCT VIDEO MONO MOVIE SUR. ROCK HALL EFFECT ON/OFF TEST CENTER MODE 3 5 85 8 DELAY TIME + - MASTER VOLUME + - 7 4 Play the source. 5 Turn the DSP on, so that a DSP program name appears - Yamaha DSP-E390 | Owner's Manual - Page 14
's Dolby Pro Logic Surround system is used, if the main-source sound is considerably altered by overadjustment of the BASS or TREBLE controls on the integrated amplifier etc., the relationship between the center and rear channels may produce an unnatural effect. q If the connected external amplifier - Yamaha DSP-E390 | Owner's Manual - Page 15
. By applying more or less delay, sound effects, background noise, and ambient noise coming at you from the rear speakers can be enhanced or subdued for extra effect. 1. PRO LOGIC : from 15 to 30 milliseconds (Preset value: 20 milliseconds) 2. PRO LOGIC : from 15 to 30 milliseconds ENHANCED - Yamaha DSP-E390 | Owner's Manual - Page 16
digital sound field programs. The sound field cannot be recorded. Noise from nearby TV or tuner. The remote control transmitter does not work. CAUSE Power cord is not plugged in or is not completely inserted. REMEDY Firmly plug in the power cord. Incorrect output cord connections. Connect
-
1 -
2 -
3 -
4 -
5 -
6 -
7 -
8
-
9
-
10
-
11
-
12
-
13
-
14
-
15
-
16
 |
 |
Natural Sound Digital Sound Field Processor
4 Programs for Digital Sound Field Processing
2 Programs for Dolby Surround (DOLBY PRO LOGIC and ENHANCED)
60W (8
Ω
) RMS Output Power, 0.1% THD, 1 kHz (Center Channel Power Amplifier)
15W + 15W (8
Ω
) RMS Output Power, 0.7% THD, 1 kHz (Rear Channel Power Amplifier)
Automatic Input Balance Control for Dolby Surround
Test Tone Generator for Easier Speaker Balance Adjustment
3 Center Channel Modes (NORMAL/WIDE/PHANTOM)
Remote Control Capability
Thank you for selecting this YAMAHA digital sound field processor.
CONTENTS
Safety Instructions
...................
2
Supplied Accessories
..............
3
Profile of This Unit
....................
4
Speaker Setup
...........................
5
Connections
.............................
6
Identification of Controls
..........
9
Speaker Balance Adjustment
...............................................
10
Using Digital Sound Field
Processor (DSP)
....................
12
Notes about the Remote
Control Transmitter
.................
15
Troubleshooting
......................
16
Specifications
.........................
16
IMPORTANT!
Please record the serial number of this
unit in the space below.
Serial No.:
The serial number is located on the rear
of the unit.
Retain this Owner’s Manual in a safe
place for future reference.
WARNING
TO REDUCE THE RISK OF FIRE OR
ELECTRIC SHOCK, DO NOT EXPOSE
THIS UNIT TO RAIN OR MOISTURE.
RISK OF ELECTRIC
SHOCK
CAUTION:
TO REDUCE THE RISK OF
ELECTRIC SHOCK, DO NOT REMOVE
COVER (OR BACK), NO USER-SERVICEABLE
PARTS INSIDE, REFER SERVICING TO
QUALIFIED SERVICE PERSONNEL.
The lightning flash with arrowhead
symbol, within an equilateral triangle,
is intended to alert you to the
presence of uninsulated “dangerous
voltage” within the product’s
enclosure that may be of sufficient
magnitude to constitute a risk of
electric shock to persons.
The exclamation point within an
equilateral triangle is intended to alert
you to the presence of important
operating and maintenance
(servicing)
instructions in the
literature accompanying the
appliance.
•
Explanation of Graphical Symbols
CAUTION
OWNER’S MANUAL
DSP-E390