Yamaha DVD-S840 Owners Manual - Page 22

Changing settings 3,4,2, 1 ENTER SET UP CANCEL RETURN Numbered buttons Entering a password (Ratings) [DVD-V] The password screen is shown when you select levels 0 to 7. 1. Input a 4-digit password with the numbered buttons. ≥If you enter a wrong number, press [CANCEL] to erase it. 2. Press [ENTER]. ≥The lock symbol appears closed to show the rating is locked. ≥Do not forget your password. 3. Press [ENTER] to confirm the 4 digits. Now, when you insert a DVD-Video that exceeds the ratings limit you set, a message appears on the television. Follow the on-screen instructions. Digital output [DVD-A] [DVD-V] Change the settings when you have connected equipment through this unit's DIGITAL OUT terminal (OPTICAL or COAXIAL). Digital Audio Output Common procedures See page 21 for menu and option details. 1 Press [SET UP] to show the menus. SETUP Disc Select whether to output digital signals or not. ≥On: Digital signals are output. ≥Off: Digital signals are not output. PCM Down Conversion Select how to output audio with a sampling frequency of 96 kHz or 88.2 kHz. ≥Select "Yes" if the equipment you connect cannot process signals with a sampling frequency of 96 kHz or 88.2 kHz. Also make the appropriate "Digital Audio Output" setting (➡ above). Audio Subtitle Menus SELECT TAB Ratings English Automatic English Level 8 ≥The QUICK SETUP screen appears when you press [SET UP] the first time after purchase (➡ page 10). 2 Press [2, 1] to select the menu's tab. The screen changes to display the menu. Disc Video (---) (---) Audio e u Others e u Display No (Factory preset): Output as 96 kHz or 88.2 kHz Yes: Converted to 48 kHz or 44.1 kHz [Note] ≥Signals are converted to either 48 kHz or 44.1 kHz despite the above settings if the signals have a sampling frequency of over 96 kHz, or the disc has copy protection. ≥Some equipment cannot handle sampling frequencies of 88.2 kHz, even if they can handle 96 kHz. Read your equipment's operating instructions for details. Dolby Digital and DTS Digital Surround Bitstream (Factory preset for Dolby Digital): Select if the equipment you connected can decode the signal. PCM (Factory preset for DTS Digital Surround): Select if the equipment you connected cannot decode the signal. 3 Press [3, 4] to select the item you want to change and press [ENTER]. 4 Press [3, 4, 2, 1] to select the option and press [ENTER]. The screen now shows the menu again. IMPORTANT If the equipment you connected cannot decode the signal, the setting must be changed to PCM. If not, signals the equipment cannot process will be output by this unit, causing high levels of noise which can damage your hearing and the speakers. RQT6918 To return to the previous screen Press [RETURN]. To exit the SETUP menu 22 Press [SET UP]. 22