Yamaha DXR15mkII DXR15mkII DXR12mkII DXR10mkII DXR8mkII Owners Manual - Page 5

English • Before moving the product, remove all connected cables. • When transporting or moving DXR15mkII, always use two or more people. Attempting to lift the product by yourself may damage your back, result in other injury, or cause damage to the product itself. • Do not use the speaker's handles for suspended installation. Doing so can result in damage or injury. • Do not hold the bottom of the product when transporting or moving it. In doing so, you may pinch your hands under the product, and result in injury. • Do not press the rear panel of the product against the wall. Doing so may cause the plug to come in contact with the wall and detach from the power cord, resulting in short circuiting, malfunction, or even fire. • Always consult qualified Yamaha service personnel if the product installation requires construction work. Improper installation might cause accidents, injuries, damage or malfunction of this product. Maintenance • Remove the power plug from the AC outlet when cleaning the product. Handling caution • Do not rest your weight on the product or place heavy objects on it. • Do not operate the product if the sound is distorting. Prolonged use in this condition could cause overheating and result in fire. PA_en_11 2/2 NOTICE To avoid the possibility of malfunction/ damage to the product, or damage to other property, follow the notices below. Handling and maintenance • Do not use the product in the vicinity of a TV, radio, or other electric products. Otherwise, the product, TV, or radio may generate noise. • Do not expose the product to excessive dust or vibration, or extreme cold or heat, in order to prevent the possibility of panel disfiguration, unstable operation, or damage to the internal components. • Do not install in locations where temperature changes are severe. Otherwise, condensation may form on the inside or the surface of the product, causing it to break. • If there is reason to believe that condensation might have occurred, leave the product for several hours without turning on the power until the condensation has completely dried out, in order to prevent possible damage. • Do not place vinyl, plastic or rubber objects on the product, since this might cause alteration or discoloration of the panel. • When cleaning the product, use a dry and soft cloth. Do not use paint thinners, solvents, cleaning fluids, or chemicalimpregnated wiping cloths, since this might cause alteration or discoloration. Information About functions/data bundled with the product • XLR-type connectors are wired as follows (IEC60268 standard): pin 1: ground, pin 2: hot (+), and pin 3: cold (-). About this manual • The illustrations as shown in this manual are for instructional purposes only. • The company names and product names in this manual are the trademarks or registered trademarks of their respective companies. About disposal • This product contains recyclable components. When disposing of this product, please contact the appropriate local authorities. Yamaha cannot be held responsible for damage caused by improper use or modifications to the product. DXRmkII series Owner's Manual 5