Yamaha DXR15mkII DXR15mkII DXR12mkII DXR10mkII DXR8mkII Owners Manual - Page 9

Tiltable pole socket 7˚ ? 0˚ ? Tiltable pole socket This mount has two pole sockets. You can choose the angle of the DXRmkII (mounted on a speaker pole) so that the speaker will be horizontal to the floor or tilting toward the floor by 7 degrees. 7˚ Suspended installation If you plan to suspend your DXRmkII series speaker, attach commercially-available eye bolts to the screw holes (which are sealed at the time of shipment) located on the top (two locations) and on the lower part of the rear (one location). The size of the screw holes on the DXR15mkII and DXR12mkII is M10 (for an eye bolt length of 18mm or less). The size of the screw holes on the DXR10mkII and DXR8mkII is M8 (for an eye bolt length of 15mm or less). Keep in mind that you will need three eye bolts to suspend it. Make sure to use the eye bolts according to the standards and safety regulations in your area. CAUTION Before doing any installation or construction work, consult with an installation expert. When choosing the installation location, suspension wire and mounting hardware, make sure all are strong enough to support the weight of the speaker. Some fittings may deteriorate over extended periods of time due to wear and/ or corrosion. For optimum safety, the installation should be checked thoroughly at regular intervals. Yamaha cannot be held responsible for damage or injury caused by insufficient strength of the support structure or improper installation. Controls and Functions DXRmkII series Owner's Manual 9 English