Yamaha EF3000iSE Owners Manual - Page 25

Battery Charging, Be sure the battery leads are properly connect - accessories

Get Yamaha EF3000iSE - Inverter Generator - 3000 Maximum AC Output PDF manuals and user guides View all Yamaha EF3000iSE manuals
Add to My Manuals
Save this manual to your list of manuals

Page 25 highlights

2 1 AE00825 Battery Charging NOTE: The generator DC rated voltage is 12V. 1. Wind the battery charging lead (furnished as an accessory) 2 or 3 turns around the handle and plug into DC receptacle. NOTE: 9 Make connections to the battery after starting the engine. 761-081a 9 Clamp the red wire to the positive (+) terminal and the black wire to the negative (-) terminal of the battery. Do not reverse these positions. 762-042 12v 762-043a w q 763-238a 1 Red 2 Black 2. Start the engine. 3. Press in the DC protector and install the battery. cC 9 Be sure the battery leads are properly connected. 9 Be sure the breather hose is properly connected and is not damaged or obstructed. 9 Reduce the load to the specified generator rated output if the DC protector turns off. If it turns off again, consult a Yamaha dealer. NOTE: Press to reset the DC protector. 1 "ON" 2 "OFF" NOTE: 9 At full charge, electrolyte specific gravity is between 1.26 and 1.28. 9 Check specific gravity hourly. - 20 -

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
–
20
–
761-081a
762-042
1
2
12v
762-043a
763-238a
q
w
AE00825
Battery Charging
NOTE:
The generator DC rated voltage is 12V.
1. Wind the battery charging lead (furnished as an
accessory) 2 or 3 turns around the handle and plug
into DC receptacle.
NOTE:
9
Make connections to the battery after starting the
engine.
9
Clamp the red wire to the positive (+) terminal and
the black wire to the negative (-) terminal of the
battery. Do not reverse these positions.
1
Red
2
Black
2.
Start the engine.
3.
Press in the DC protector and install the battery.
c
C
9
Be sure the battery leads are properly connect-
ed.
9
Be sure the breather hose is properly connect-
ed and is not damaged or obstructed.
9
Reduce the load to the specified generator
rated output if the DC protector turns off. If it
turns off again, consult a Yamaha dealer.
NOTE:
Press to reset the DC protector.
1
“
ON
”
2
“
OFF
”
NOTE:
9
At full charge, electrolyte specific gravity is
between 1.26 and 1.28.
9
Check specific gravity hourly.