Yamaha EMX5000-20 Owner's Manual - Page 25
Digital effect program list, Common to EFFECT 1 and 2, EFFECT 1
View all Yamaha EMX5000-20 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 25 highlights
Using the digital effect 23 Digital effect program list Common to EFFECT 1 and 2 No. Program Description REVERB HALL REVERB ROOM REVERB PLATE REVERB VOCAL 1 REVERB VOCAL 2 VOCAL ECHO 1 VOCAL ECHO 2 DELAY 1 DELAY 2 Reverberation simulating a spacious expanse such as a concert hall. Reverberation simulating the acoustics of a small room. Simulation of a plate reverb device. Produces a hard-sounding reverberation. Ideal reverb for vocals. Ideal echo for vocals. Delay effect that delays the signal. Controllable parameter Parameter Reverb time Variable range 0.3-10.0s Reverb time 0.3-3.2s Reverb time 0.3-10.0s Reverb time 0.3-10.0s Delay time 0-800ms Delay time 0-800ms EFFECT 1 MOD. DELAY REVERB GATE PITCH CHANGE CHORUS PHASER RADIO VOICE TREMOLO Monaural delay with modulation Delay time An effect that simulates reversed early reflections. Room size An effect that changes the pitch of the input signal. Pitch Modulates the delay time of the signal to add depth to the sound. Depth An effect that changes the phase of the sound to create modulation. Modulation frequency An effect that produces a lo-fi sound like that of an Drive AM radio. An effect that adds modulation to the sound. Modulation frequency 0-800ms 0.1-10.0 -12-+12 0-100% 0.05-4.00Hz 0-100 0.05-10.00Hz EFFECT 2 EARLY REF. GATE REVERB VOCAL DOUBLER SYMPHONIC FLANGE DISTORTION TAP DELAY An effect produced by modifying the early reflections. It lets you add depth to the sound, or create echo-like effects. An effect produced by cutting the reverberation. Produces an effect as though two people were singing. Gives a richly layered depth to the sound. Adds a sense of pitch to the tone. Effective on sounds that contain numerous overtones. The well-known effect used to distort the sound. This effect sets the delay time to the interval at which you actually press the switch. The amount of feedback can be adjusted by the PARAMETER control. The LED will blink in synchronization with the delay time. Room size 0.1-10.0 Room size Pitch fine 0.1-5.0 0-50 Depth Modulation frequency Drive Feedback gain Delay time 0-100% 0.05-4.00Hz 0-100 0-99% 100ms (600bpm)- 2690ms (22.3bpm)* * The LED can not blink any faster than an interval of 256 ms (234.3 bpm). EMX5000-20/EMX5000-12-Owner's Manual